The thermal shock test machine is used to test the chemical structure changes caused by thermal expansion and contraction in the shortest time by testing the material structure or composite material in a transient environment of extremely high temperature and very low temperature. Or physical damage. Suitable objects include metal, automotive electronics / components, LED / LCD / PDP display lighting, new energy / electronic components / electrical appliances, plastic / rubber / film, research / quality inspection / college / medical equipment, PCB / FPC / HDI / Materials such as MPCB/IC and other industrial fields can be used as the basis and reference for the verification or improvement of product quality.
※ Fully automatic PID control with high precision and saving 30% power,
※ The two boxes are divided into two parts: high temperature zone and low temperature zone. The test products are placed in the basket. When the impact is raised, the test product is moved into the high temperature zone or the low temperature zone for weighing. The test product is dynamic and has a door opening safety system.
※ It adopts touch-type graphic control operation interface, which is easy to operate.
※ Impact mode Apply the air path switching method to introduce the temperature into the test area and do the thermal shock test.
※ When high temperature impact or low temperature impact, the maximum time can reach 999H, and the maximum cycle time can reach 9999 times.
※ The system can be used for automatic cycle or manual selective shock and can be set to start with two cold and hot starts.
※ Cooling and adopting binary refrigeration system, the cooling effect is fast.
※ Basket conversion time: Within 10 seconds (other requirements are agreed)
※ Execution meets the standards and test methods: GJB150.5 temperature impact test; GJB360.7 temperature impact test; GB/2423.22
Internal size WxDxH (cm)
80×80×80 (or non-standard custom)
Basket temperature range °C
Preheating temperature °C
Pre-cooling temperature °C
A:-10℃~ -55℃ B:-10℃~ -70℃ C:-10℃~ -75℃
High temperature impact range
Low temperature impact range
A:-10℃~ -40℃ B:-10℃~ -55℃ C:-10℃~ -65℃
Heating time (heat storage area) min
RT~200°C is about ≤35min
Cooling time (cold storage area) min
A:+20~ -55℃About need60min B:+20~ -70℃About need≤70min C:+20~ -75℃About need85min
Basket conversion time
Water-cooled ambient temperature requirement +5~ +35°C
Temperature recovery time
Within 5 minutes
High temperature exposure for 30 minutes
Low temperature exposure for 30 minutes
Temperature control accuracy
Internal and external materials
Steel plate electrostatic spraying surface treatment or SUS 304 stainless steel
SUS 304 stainless steel
High density polyurethane foam + glass wool
7-inch touch screen, Chinese and English display, 120 sets of programs, 1200 segments, all cycles 99 times, partial cycles 99 times, temperature 0.1% of FS±1 digit Humidity: 0.1%of FS±1digit, temperature pt-100, humidity: pt- 100or 5V DCV; Communication USB or RS485 (other communication negotiation)
R404/R23 (environmental refrigerant)
Semi-closed two-stage compressor (water-cooled)
1. Compressor overpressure, overheating, overcurrent protection; 2 refrigerant high voltage protection switch; 3. fault alarm system; 4. thermal storage high temperature cold storage low temperature protection; 5. electronic alarm;
6. Water shortage alarm protection (water cooling); 7. No fuse switch; 8. Power phase sequence protection; 9. Test chamber temperature protection
Two sample holders, measuring hole diameter 50mm*1, power cord, manual
AC380V 50HZ three-phase four-wire + ground wire
Korea TECH Sanyuan / Tai Tong TATO
French BITZER BITZER compressor / Germany GEA blog compressor