1. As a high-tech testing equipment, the universal material testing machine can be found to have different structures. During the quarterly maintenance and repair process, the relevant personnel need to perform corresponding inspections on each structure of the equipment to ensure that the lubrication parts are adequately lubricated.
2. We need to thoroughly check the main part of the test machine to ensure that no abnormal noise will occur during use. In addition, in the universal test machine, there are different buttons and control keys, etc., which must be in the quarter. Check the maintenance plan to see if they are flexible.
3. At this stage, different manufacturers will introduce corresponding protection devices and equipment control device systems, etc. Everyone needs to check these two key points to ensure better protection of the whole performance of the equipment.
4, some dead corners also need to carry out Wenjie maintenance, and to check the relevant performance of the equipment, test whether it can make accurate tests.
5. Always check the cable and wires of the equipment to see if they are already aging or damaged. Once found, they must be replaced in time.
6. The universal testing machine has many different fixing screws. It pays attention to whether the screw nut of each part has looseness or rust. If any parts of the testing machine are found to have problems, they need to be replaced at the first time.
7. It is necessary to check the universal testing machine circuit to ensure that it has a good grounding state, and there are no missing or damaged components. Once any missing or damaged components are found, the original manufacturer's components must be ordered for replacement. The test test data is affected and distorted.