The machine is widely used in the mechanical properties test of metal, rubber, plastic, metal bar, metal pipe, metal sheet and metal profile and composite material. It is also suitable for stretching, compression, stripping and shearing of various finished products. , tearing, bending (folding), metal welding strength, riveting strength test. It can print multiple data, and can make graphic output comparison according to different data. It has high control precision and easy operation. It adopts modular design and various accessory accessories are complete and flexible. This machine is mainly suitable for testing the mechanical properties such as tensile, compression and bending of various materials. It can also realize multi-closed cycle tests such as constant stress, constant strain, creep, relaxation, axial and radial. Automatic determination of tensile strength, yield strength, elongation, constant elongation stress (any percentage), constant stress elongation (any percentage), elastic modulus, elongation at break according to GB, JIS, ASTM, DIN, etc. Peeling strength (including 90, 180 degrees peeling), flexural modulus, tear strength, bond strength, shear strength and other parameters.
Online
Hotline：400-8353-568
1. High-precision displacement, speed, and load full-closed control software
2. Transmission: High-precision ball screw drive, high efficiency, high rigidity, small deformation and low noise.
3. Drive: Driven by Japanese Panasonic servo motor, it provides stable, wide-width adjustable speed drive, high speed, low vibration and high speed positioning.
4. Crosspiece material: It is made of 45# die steel by grinding, parallel error ≤0.5mm, high rigidity;
5. Orientation: It adopts the four-column guide of chrome steel rod originated from South Korea, which has excellent wear resistance and coaxiality;
6. Displacement measurement: the displacement is measured by a Japanese LINE high pulse (2500r/p) photoelectric encoder, up to: 0.001mm;
7. Force value measurement: using the US TRANSCELL precision tensile and explosion-proof load cell, accuracy: 0.03% F.S
8. Control board: It adopts self-developed 32-bit ARM chip for measurement and control, which is better than 16-bit DSP processing technology in the industry. High resolution: 1/500000
9. The software is powerful: it can meet the test of different materials, and can execute different standards at the same time, including foreign standards (multiple standard data processing functions). Units: N, kN, g, kgf, Ib, cN can be converted to each other. Test software designed to full test standards is powerful. The test curve can be enlarged, and it can clearly see how much, how fast and slow the data is collected, and the smoothness of the curve, which can also reflect the overall processing power of hardware and software.
10. Test report and curve: The curve is accurate, the test report can be edited, and the test curve is high in density, indicating that the test sampling frequency is fast, which is more obvious than the peers.
model | WBE-9000 Series 20KN | ||||
WBE-9000B | WBE-9000A | ||||
Capacity selection | 5、10、20、30、50、100、200、300、500N、1、2、3、5、10、20 、30 kN Standard with one range; optional three ranges | ||||
Accuracy level | <1KN：0.1 ≥1KN:0.25 | <1KN：0.25 ≥1KN:0.5 | |||
Load parameter | Test force measurement range | 0.2% to 100% FS (full scale) | |||
Test force indication error | ±0.1%, ±0.25%, ±0.5% of the model B value (different ranges) / ±0.5% of the value of the model A, ±1% or less (different ranges) | ||||
Test force resolution | The maximum test force of the Model B model is 500000 / A. The maximum test force is 200,000, the whole process is not divided, and the resolution is unchanged. | ||||
Displacement parameter | Displacement indication error | Within ±0.2% of the value of the model B and within ±0.5% of the value of the model A | |||
Displacement resolution | Bmodel 0.015μm/ Amodel 0.1μm | ||||
control parameter | Stress control rate range | Bmodel0.005～5%FS/s / Amodel0.05～5%FS/s | |||
Stress control rate accuracy | When the speed of the B model is <0.05% FS/s, it is within ±1% of the set value, and when the rate is ≥0.05%FS/s, it is within ±0.5% of the set value; When the speed of the model A is <0.1% FS/s, it is within ±2% of the set value, and when the rate is ≥0.1%FS/s, it is within ±0.5% of the set value; | ||||
Strain control rate range | Bmodel0.005～5%FS/s / Amodel0.05～5%FS/s | ||||
Strain control rate accuracy | When the speed of the B model is <0.05% FS/s, it is within ±1% of the set value, and when the rate is ≥0.05%FS/s, it is within ±0.5% of the set value; When the speed of the model A is <0.1% FS/s, it is within ±2% of the set value, and when the rate is ≥0.1%FS/s, it is within ±0.5% of the set value; | ||||
Displacement control rate range | Bmodel0.001～500mm/min /Amodel0.01～500mm/min | ||||
Displacement control rate accuracy | Model B is within ±0.2% of the set value / A model is within ±0.5% of the set value | ||||
Force control rate relative error | Within +1% of the B model setting value / within +2% of the A model setting value | ||||
Constant stress, constant strain, constant displacement control range | Bmodel0.5%～100%FS / Amodel1%～100%FS | ||||
Constant stress, constant shape, constant displacement control accuracy | When the set value of model B is ≥10%FS, it is within ±1% of the set value. When the set value is ≥10%FS, it is within ±0.1% of the set value. When the model A setting value is ≥10%FS, it is within ±2% of the set value. When the set value is ≥10%FS, it is within ±0.5% of the set value. | ||||
Host parameter | Dimensions (length, width and height) | About 800 × 650 × 1755mm plus the base plus 500mm | |||
No fixture test space | 1100mm or agreed | 1100mm or agreed | |||
Effective test width | 400mm/550mm (or agreed) | 400mm/550mm (or agreed) | |||
power supply | 220V 50Hz，±10% | 220V 50Hz，±10% | |||
power | 0.75KW | 0.75KW | |||
Host weight | About 195KG | About 195KG | |||
weibang instrumentequipment
Testing instrument manufacturer
Features
Specifications
Strength
Related
Sweep to add WeChat